Trolling Speed Inspection - Yamaha VX110 Sport Service Manual

INSP
ADJ
CONTROL SYSTEM
• Turn out the cable joint nine times a to
extend the cable 7 mm (0.28 in) from the
aligned position.
WARNING
The cable joint must be screwed in more
than 8 mm (0.31 in).
• Connect the cable joint and tighten the
locknut.
Locknut:
3.8 N • m (0.38 kgf • m, 2.7 ft • lb)

Trolling speed inspection

1. Inspect:
• Trolling speed
Trolling speed:
1,550–1,750 r/min
Checking steps (watercraft in water):
• Start the engine and allow it to warm up
for 15 minutes.
• Check the engine trolling speed using the
tachometer of the multifunction meter or
using the Yamaha Diagnostic System.
3-6
E