Application of Assembly
1-8 Attachment of Set screw collar
1. Set the washer thrust and the set screw collar 1 to the horizontal feed
shaft, and then tighten the screw 1 temporarily (2 locations).
*Key point
• Fully tighten the screw after performing
Feed
module".
1
1-9 Attachment of Feed supporting plate
1. Set the feed supporting plate 1 to the feed arm assy 2.
*Key point
• Check that engage the protrusion 3 of the feed supporting
plate 1 with the groove 4 of the feed arm assy 2.
2. Set the feed supporting plate B 5 to the feed supporting plate 1, and
attach the feed arm assy 2 with the screw 1.
*Key point
• Check that engage the boss of the feed supporting plate B 5
with the positioning hole of the feed supporting plate 1.
• Check that sandwich the feed cam 6 with the feed supporting
plate 1 and the feed arm assy 2.
1
Feed unit
"2-47 Attachment of
Set Screw, Socket (CP)
M4X4
Screw, Bind
M3X8
3 - 70
1
1
1
1
2
1
5
6
2
3
4
1
1