Removal Of Motor 3P Supply Assy - Brother XM3700 Service Manual

Basic of Disassembly
1

Removal of Motor 3P supply assy

120V specification
1. Remove the timing belt 1 from the T pulley 2 and the motor T-pulley 3.
2. Remove the screw 1 and the 2 screws 2, and then remove the motor assy
4 of the motor 3P supply assy.
*Key point
• Be careful not to damage the fins of the motor T-pulley 3.
• Be careful not to pull the harness of the motor assy 4 by
force.
3. Remove the 2 screws 3, and then remove the 3P socket unit 5 of the
motor 3P supply assy.
<In case of 220 to 240V specification, refer to next page.>
→
Refer to 3 - 7 of the Disassembly.
Main motor unit
2 - 7
1 2
4 3 2 5
1 4
3
5 4