Application of Assembly
1
Assembly of Needle-presser module
1-1 Attachment of Shaft bushing
1. Set the shaft bushing 1 to the base holder assy, and then secure it with the
2 screws 1.
1
1-2 Attachment of Lock nut
1. Attach the lock nut 1 to the screw 1.
*Key point
• Tighten the lock nut 1 to about half of the screw 1.
2. Attach the screw 1 to the base holder assy.
*Key point
• Tighten it until the lock nut 1 hit the base holder assy.
• Refer to
"4-17 Adjustment: Needle drop position to presser
foot hole
(front/back)".
1
Upper shaft, Needle bar and Presser foot unit
Screw, Bind
M3X6
Set Screw, Socket (CP)
M4X12
3 - 42
1
1
1
1
1