Adjustment
<From previous page>
12. Tighten the screw 1 of the feed dial gear to secure the feed dial gear.
1
13. Turn the stitch length dial until the [4] is the topmost position.
Feed dial gear
14. Turn the pulley by hand to the direction of the arrow and drop 11 stitches on a paper, and check the feed length.
*Key point
• At stitch length dial [4] (feed : maximum), the feed length should be more than 36 mm when sewing at 10
pitches. (Fig. 2)
Needle
Feed distance
Set Screw, Socket (CP)
M4X4
1
Back side view
Paper
4 - 31
Stitch length dial
OK
Rear side
START
10 pitches:
more than 36 mm
11th stitch
Front side
Fig. 2
Pulley