Assembly Of Z Dial Assy - Brother XM3700 Service Manual

Application of Assembly
1

Assembly of Z dial assy

1. Attach the retaining ring E2 1 to the ES pin F-B 2.
2. Insert the ES pin F-B 2 into the back side of the Z dial 3 and the Z dial
connecting rod 4, and then attach the retaining ring E2 5.
3. Set the notched spring 6 and the Z dial 3 to the shaft 7 of the Z dial
holder assy 8, and then attach the retaining ring E4 9.
*Key point
• Check that align the boss of the Z dial holder assy 8 with the
positioning hole of the notched spring 6.
Zigzag mechanism
3 - 57
3 1
2
3 4
5 2
6
7 8
3 9