Assembly Of Front Cover Assy; Attachment Of Rubber Cushion A; Attachment Of Led Lamp Supply Assy - Brother XM3700 Service Manual

Application of Assembly
2

Assembly of Front cover assy

2-1 Attachment of Rubber cushion A

1. Set the rubber cushion A 1, the washer 2 and the washer plain M3.5 3
to the bottom side of the front cover assy, and then secure them with screw
1.
1

2-2 Attachment of LED lamp supply assy

1. Set the LED lamp supply assy 1 to the inside of the front cover assy, and
then secure it with the screw 1.
2. Pass the lead wire through the 5 guide parts and the hook part 2 as shown
in the right figure, and then attach the 5 retaining rings CS4 3 to the 5
bosses of the 5 guide parts.
*Key point
• Refer to "Special Instructions of
1
Main frame and Covers
Taptite, Pan B
M3.5X12
Wiring".
Taptite, Bind B
M3X10
3 - 80
1
2
3
1
1
1
1
1
2 3
3