Application of Assembly
1-4 Attachment of V feed attachment
1. Attach the lock nut 1 to the screw 1.
*Key point
• Tighten the lock nut 1 to about a quarter of the screw 1.
2. Attach the screw 1 to the feed stand sub assy 2.
*Key point
• Tighten it until the lock nut 1 hit the feed stand sub assy 2.
• Refer to
"4-26 Adjustment: Feed dog
3. Set the V feed attachment 3 to the back side of the feed stand sub assy 2.
1
1-5 Attachment of Feed arm assy
1. Set the polyester slider and the feed arm assy 1 to the shaft 2 of the feed
stand sub assy 3, and then attach the retaining ring CS4 4.
Feed unit
height".
Set Screw, Socket (FT)
M4X18
3 - 68
1
1
2
1
1
3
2
3
4
2
1