Attachment Of Nt Lower Thread Cutter; Attachment Of Slide Plate - Brother XM3700 Service Manual

Application of Assembly

1-15-3 Attachment of NT lower thread cutter

1. Set the NT lower thread cutter 1 to the back side of the cutter cover 2,
and then attach the retaining ring CS3 3.
2. Set the cutter cover 2 to the needle plate B 4.
*Key point
• Check that hang the hook 5 of the cutter cover 2 on the back
side of the needle plate B 4.

1-15-4 Attachment of Slide plate

1. Set the slide plate 1 to the needle plate B 2.
Feed unit
3 - 74
2 3
1
4
2
4
5
2
1
1