Radius/Tacacs; Show Authentication - Fujitsu XG2000 Series User Manual

XG2000 series User's Guide

5.5 RADIUS/TACACS+

This section explains the commands related to RADIUS/TACACS+.

5.5.1 show authentication

Function
Displays the setting status of authentication method.
Prompt
xg#
Command syntax
show authentication
Command type
Operation management commands.
Output form
xg# show authentication
Authentication Information
===============================================================================
Serial/Telnet(console)
====================================
Login Primary
Login Secondary : none
SSH(ssh)
====================================
Login Primary
Login Secondary : none
===============================================================================
Login Primary
Displays the primary login authentication method.
−
−
−
Login Secondary
Displays the secondary login authentication method. Secondary login authentication is used
if primary login authentication is failed.
−
−
Example
Displays the setting status of authentication method.
xg# show authentication
: Local
: RADIUS
Local
Local authentication based on the account information stored in the device is used.
RADIUS
RADIUS authentication using PAP(User Password) is used.
TACACS+
TACACS+ authentication using PAP(User Password) is used.
Local
Local authentication based on the account information stored in the device is used.
none
Secondary login authentication is disabled.
All Rights Reserved, Copyright (C) PFU LIMITED 2009
90/315
2008/05/20-16:23:25