Fujitsu XG2000 Series User Manual page 132

XG2000 series User's Guide
Output form (in case of LACP link aggregation)
xg# show link-aggregation
Link Aggregation Information
===============================================================================
System Priority : 32768
System ID
-------------------------------------------------------------------------------
[agg-port 1]
Master port
Management packet send port : port <1-20>
Mac address
Protocol
Distribution algorithm
The minimum number of ports : 1
Actor System Key
Partner System Priority
Partner System ID
Partner Key
[port 1]
Port Status
Port Priority
Synchro State
Receive State
Periodic Tx State
Actor System Key
Partner System Priority
Partner System ID
Partner Key
Partner Port Priority
Partner Port Number
Partner Synchro State
[port 2]
Port Status
Port Priority
Synchro State
Receive State
Periodic Tx State
Actor System Key
Partner System Priority
Partner System ID
Partner Key
Partner Port Priority
Partner Port Number
Partner Synchro State
[agg-port 2]
===============================================================================
Link aggregation common information
Link aggregation information related to the switch in general will be displayed. The display content is the same as the case of a
static link aggregation group.
LACP Link aggregation specific information
Items common to each aggregation group that will be displayed.
Actor System Key
The system key used by LACP is displayed.
Partner System Priority
LACP system priority will be displayed. This system priority is from the device which is
connected by LACP shown in this command.
Partner System ID
LACP system ID will be displayed. This system priority is from the device which is connected
by LACP shown in this command.
Partner System Key
LACP system key will be displayed. This system priority is from the device which is connected
by LACP shown in this command.
The state of each port belonging to an LACP link aggregation group is then listed.
[port 1]
Indicates the port number being displayed.
Port Priority
The status of the port is displayed.
−
−
: 0080.17c2.05e2
: port <1-20>
: 0080.17c2.2144
: { LACP - Active | LACP - Passive }
: { Destination address | Source address
| Destination address & Source address
| Vlan | IP Hash }
{ Destination IP | Source IP
: 1
: 32768
: 0080.17c2.05e2
: 2
: {Active | Inactive }
: 32768
: { Sync | No Sync }
: { Invalid | Initialize | Port Disabled | LACP Disabled| Expired
| Defaulted| Current}
: { Invalid | No Periodic | Fast Periodic | Slow Periodic }
: 1
: 32768
: 0080.17c2.05e2
: 2
: 32768
: 10011
: { Sync | No Sync }
: { Active | Inactive }
: 32768
: { Sync | No Sync }
: { Invalid | Initialize | Port Disabled | LACP Disabled | Expired
| Defaulted| Current}
: { No Periodic | Fast Periodic | Slow Periodic }
: 1
: 32768
: 0080.17c2.05e2
: 2
: 32768
: 11
: { Sync | No Sync }
Active
The port is usable.
Inactive
The port is not usable.
All Rights Reserved, Copyright (C) PFU LIMITED 2009
2005/04/24-16:16:36
| Destination port | Source port }
132/315