Fujitsu XG2000 Series User Manual page 133

Xg2000 series compact, 20-port 10 gigabit ethernet layer 2 switch
Hide thumbs Also See for XG2000 Series:
Table of Contents

Advertisement

XG2000 series User's Guide
Synchro State
The synchronization status of the port is displayed.
Receive State
Displays the reception status of LACP protocol.
Periodic Tx State
The state of the LACP transmit interval control frame is displayed.
Partner System Priority
LACP system priority will be displayed. This system priority is from the device which is
connected by a port.
Partner System ID
LACP system ID will be displayed. This system priority is from the device which is connected
by a port.
Partner System Key
LACP system key will be displayed. This system priority is from the device which is connected
by a port.
Partner Port Priority
The port priority value of the connection's destination device is displayed.
Partner Port Number
The port number of the connection's destination device is displayed.
Partner Synchro State
The port synchronization status of the connection destination device is displayed.
Note
In the case of LACP link-aggregation, make sure to confirm "Partner System Priority", "Partner System ID", "Partner
System Key" .are matched for each port of a LACP aggregation member. If not matched, it is necessary to connect
correctly and reissue the command.
Example
Display the state of all aggregation groups.
xg> show link-aggregation
Sync
The link state of LACP with the destination device connection is in a synchronized
state.
No Sync
The link state of LACP with the destination device connection is not in a synchronized
state.
Invalid
The LACP port destination device connection is in trouble.
Initialize
The LACP port destination device connection is in initializing.
Port Disabled
The LACP port of the destination device connection is disabled.
LACP Disabled
LACP at the connection destination device is disabled.
Expired
LACP information with for destination device connection expired.
Defaulted
The LACP port of the destination device is about to be connected.
Current
The LACP port of the destination device is an LACP connected state.
No Periodic
An LACP control frame will not be sent.
Fast Periodic
LACP control frames are sent at short intervals.
Slow Periodic
LACP control frames are sent at long intervals.
Sync
The LACP link state is synchronized.
No Sync
The LACP link state is not synchronized.
All Rights Reserved, Copyright (C) PFU LIMITED 2009
133/315

Advertisement

Table of Contents
loading

Table of Contents