Monitor Traffic-Counts - Fujitsu XG2000 Series User Manual

XG2000 series User's Guide

5.16.2 monitor traffic-counts

Function
Displays the transmission frame count at each port.
Prompt
xg> or xg#
Command syntax
monitor traffic-counts { current | total } [interval <3-60>]
Parameter
{ current | total }
Specifies the statistics to be displayed.
−
−
interval <3-60>
Specifies the update interval (in seconds).
The default interval is 3 seconds.
Command type
Operation management command
Output form (if "current" is specified)
xg# monitor traffic-counts current
Traffic Statistics(Current Frame Counts)
===============================================================================>
Port Link State/ Tx-Frame
STP State
---- ----------
1 Up/Discard
2 Down
3 Up/Discard
4 Up/Learn
5 Up/Forward
6 Up/Forward
===============================================================================>
ESC:exit
U:page up
(continues)
Traffic Statistics(Current Frame Counts)
<=================================================================================
Rx-Mcast
Counts
----------- ------------------------------------
1234567890K port_name1
1234567890K port_name3
256M port_name4
256G port_name5
256T
<=================================================================================
ESC:exit
U:page up
Port
Displays the port numbers. Statistics for each port are displayed on one line.
Link State/STP State
Displays the port state in the Link State or STP State format.
The Link State may indicate one of the following link states.
−
−
The STP State displays the current port status based on the STP (Spanning Tree Protocol).
Note that the STP State is not displayed if the Link State is down.
For port status details, see
Tx-Frame Counts/S
Displays the transmission frame rate (in fps) using an 8-digit, right-justified value.
Rx-Frame Counts/S
Displays the receive frame rate (in fps) using an 8-digit, right-justified value.
Tx-Frame Counts
Displays the number of accumulated transmission frames after execution of this command, using
a 10-digit, right-justified value.
Rx-Frame Counts
Displays the number of accumulated receive frames after execution of this command, using
a 10-digit, right-justified value.
current
Displays the number of accumulated transmission frames after startup of this command.
total
Displays the number of accumulated transmission frames after startup of the system.
Rx-Frame
Counts/S Counts/S
---------- ---------- ---------- ------------ -----------
12345678K 12345678K
0
923
999123
999
999999
F:refresh
D:page down L:page left R:page right
Port-Description
0 port_name2
F:refresh
D:page down L:page left R:page right
Down
The port link is down.
Up
The port link is up.
All Rights Reserved, Copyright (C) PFU LIMITED 2009
Tx-Frame Rx-Frame
Counts Counts
1234567890K 1234567890K
0 0
923 1234567890K 1234567890K
999123 1234567890M
999 1234567890G
999999 1234567890T
"Spanning Tree Protocol Port
209/315
2007/01/22-12:12:15
Rx-Bcast
Counts
1234567890K
0 0
1234567890K
256M 256M
256G 256G
256T 256T
2007/01/22-12:12:15
States".