Monitor Framesize-Traffic-Counts - Fujitsu XG2000 Series User Manual

XG2000 series User's Guide

5.16.3 monitor framesize-traffic-counts

Function
Displays a frame count and size range for frames which have been sent or received at each port.
Prompt
xg> or xg#
Command syntax
monitor framesize-traffic-counts { current | total } [interval <3-60>]
Parameter
{ current | total }
Specifies the statistics to be displayed.
−
−
interval <3-60>
Specifies the update interval (in seconds).
The default interval is 3 seconds.
Command type
Operation management command
Output form (if "current" is specified)
xg# monitor framesize-traffic-counts current
Framesize Traffic Statistics(Current Frame Counts)
===============================================================================>
Port Link State/ FrameSize
STP State
---- ---------
1 Up/Discard
2 Down
3 Up/Discard
4 Up/Learn
5 Up/Forward
6 Up/Forward
7 Down
8 Down
===============================================================================>
ESC:exit
U:page up
(continues)
Framesize Traffic Statistics(Current Frame Counts)
<==========================================================================
FrameSize
1024-1518
----------- --------------------------------------------
1234567890K port_name1
1234567890K port_name3
25690 port_name4
25690G port_name5
25690T port_name6
<==========================================================================
ESC:exit
U:page up
Port
Displays the port numbers. Statistics for each port are displayed on one line.
Link State/STP State
Displays the port state in the Link State or STP State format.
The Link State may indicate one of the following link states.
−
−
The STP State displays the current port status based on the STP (Spanning Tree Protocol).
Note that the STP State is not displayed if the Link State is down.
For port status details, see
FrameSize 0-64
Displays the number of accumulated 64-byte frames sent or received after the command
execution.
FrameSize 65-127
Displays the number of accumulated 65- to 127-byte frames sent or received after the command
execution.
FrameSize 128-255
Displays the number of accumulated 128- to 255-byte frames sent or received after the command
execution.
current
Displays the number of accumulated frames after startup of this command.
total
Displays the number of accumulated frames after startup of the system.
FrameSize
0-64 65-127
---------- ---------- ----------- ----------- -----------
1234567890K 1234567890K 1234567890K 1234567890K 1234567890K
0
1234567890K 1234567890K 1234567890K 1234567890K 1234567890K
1234567890M
1234567890G
1234567890T
0
0
F:refresh
D:page down L:page left R:page right
Port-Description
0 port_name2
0 port_name7
0
F:refresh
D:page down L:page left R:page right
Down
The port link is down.
Up
The port link is up.
All Rights Reserved, Copyright (C) PFU LIMITED 2009
FrameSize
128-255
0 0
25690M 25690M
25690G 25690G
25690T 25690T
0 0
0 0
"Spanning Tree Protocol Port
211/315
2007/01/22-12:12:15
FrameSize FrameSize
256-511 512-1023
0
25690M 25690M
25690G 25690G
25690T 25690T
0
0
2007/01/22-12:12:15
States".
0
0
0