Fujitsu XG2000 Series User Manual page 208

XG2000 series User's Guide
Port-Description
Displays port descriptions. If the port is not described, it will not display anything.
Up to 33 characters can be displayed.
Output form (if "total" is specified)
xg# monitor traffic-bytes total
Traffic Statistics(Total Frame Bytes)
==============================================================================
Port Link State/
STP State
---- ------------- ----------- ------------ ---------------------------------
1 Up/Discard
2 Down
3 Up/Discard
4 Up/Learn
5 Up/Forward
6 Up/Forward
7 Down
8 Down
==============================================================================
ESC:exit
U:page up
Port
Same as the display description for the "current" option
Link State/STP State
Same as the display description for the "current" option
Tx-Frame Bytes
Displays the accumulated transmission byte count after system startup, using a 10-digit,
right-justified value.
Rx-Frame Bytes
Displays the accumulated receive byte count after system startup, using a 10-digit,
right-justified value.
Port-Description
Same as the display description for the "current" option
Tx-Frame Rx-Frame
Bytes Bytes
1234567890K 1234567890K port_name1
1234567890G 1234567890G port_name2
1234567890M 1234567890M port_name3
1234567890T 1234567890T port_name4
1234567890 1234567890 port_name5
1234567890 1234567890 port_name6
1234567890 1234567890 port_name7
1234567890 1234567890
F:refresh
D:page down L:page left R:page right
All Rights Reserved, Copyright (C) PFU LIMITED 2009
Port-Description
208/315
2007/01/22-12:12:15