Your Network Connection; Launching Your Network Connection; Setting Up A Guest Wi-Fi Network; Turning The Guest Wi-Fi Network On - NETGEAR Zing Mobile Hotspot User Manual

Your Network Connection

Find out how to launch, share, and end your network connection.

Launching Your Network Connection

After your device powers on and boots up, a connection to the best available network is
launched automatically.
Your device will remain connected at all times, unless:
●
You are out of signal range or the signal is blocked (in a tunnel, etc.).
●
You are in a roaming area and you have chosen not to allow roaming.
Note: Even though your device is connected, you are only billed when data is sent or received.
See If the Connection is "Always On," Am I Always Being Billed?
See also:
●
Internet Connection Information
●
Mobile Broadband Information and Settings
●
Signal Information

Setting up a Guest Wi-Fi Network

Your NETGEAR Zing Mobile Hotspot lets you create a separate Guest Wi-Fi network that you
can share with temporary users.
Devices on the Guest Wi-Fi network:
●
Cannot access devices that are on the Main Wi-Fi network (such as printers or other
computers)
●
Cannot use the Zing Manager to change any device settings

Turning the Guest Wi-Fi Network On

You can turn on the Guest Wi-Fi network on your device's Guest Wi-Fi screen, and on the Zing
Manager's Wi-Fi page.
On the Touchscreen
1. Tap > Wi-Fi > Guest Wi-Fi.
Your Network Connection 18