NETGEAR Zing Mobile Hotspot User Manual page 90

USB IP Address
VPN Passthrough
DHCP Server
DHCP IP Range
DHCP lease time
DNS mode
DNS 1
DNS 2
DMZ
DMZ Enabled
DMZ Address
Zing Manager (Browser) Interface
The IP address assigned to the hotspot by the computer to which it is
tethered.
VPN connections are enabled (On) or disabled (Off). See
Passthrough.
This field enables (On) or disables (Off) DHCP. See DHCP.
This specifies the starting and ending address of the range of IP
addresses available for your device to dynamically (that is, not
permanently) assign to computers connected to it. See DHCP.
This is the amount of time, in minutes, a computer can use its assigned
IP address before it is required to renew the lease. After this time is up,
the computer is automatically assigned a new dynamic IP address. See
DHCP.
Enter a number between 2 and 10080.
This specifies how the DNS servers (that the DHCP clients are to
communicate with) are obtained.
●
Manual – The routing hardware assigns DHCP clients the DNS
servers specified in the DNS 1 and DNS 2 fields
Use this option to access a DNS server that provides customized
addressing or if you have a local DNS server on your network.
Note: The DNS 1 and DNS 2 fields appear only if DNS Mode is
Manual.
●
Auto – The DNS server specified by Sprint is used.
Address of a manual DNS server. (This field appears only if DNS Mode
is Manual.)
Address of a manual DNS server. (This field appears only if DNS Mode
is Manual.)
Enable / disable demilitarized zone.
If DMZ is enabled, this is the IP address of a single computer used to
receive all unsolicited incoming connections.
82
Enabling VPN