Gps Settings; Enabling / Disabling Gps; Setting The Gps Mode - NETGEAR Zing Mobile Hotspot User Manual

GPS Settings

Your NETGEAR Zing Mobile Hotspot provides GPS functionality to help you figure out where
you are and get you where you're going.
There are a couple of requirements to access the GPS service.
●
You must accept the GPS privacy agreement.
●
GPS must be enabled.
The GPS service may not be available if you are indoors. (You may be able to get a GPS lock if
your device is very close to a window.) GPS receivers must be able to lock onto the global
positioning satellites to accurately determine position. The number of obstructions present
indoors often makes accurate position determination impossible.

Enabling / Disabling GPS

Before you can access GPS services, you must enable GPS on your device's GPS screen, or
the Zing Manager's GPS page.
On the Touchscreen
1. Tap > Settings > GPS.
2. Tap On (or Off to disable GPS).
3. If the GPS privacy agreement opens, you must read it and then tap I Agree to accept
it.
In the Zing Manager (http://sprinthotspot)
1. Log in to the home page. (See
2. Click GPS.
3. In the GPS Settings section, select Yes next to "Enable GPS" (or select No to
disable GPS).
4. Click Submit.

Setting the GPS Mode

The GPS mode determines how often location fixes are done.
Location fixes can be done:
●
Once ("one-time", which can prolong the battery life), or
GPS Settings
Logging In as an Administrator.)
111