Upgrading Firmware From A File; Resetting Your Device; Clearing Account Details Only - NETGEAR Zing Mobile Hotspot User Manual

In the Zing Manager (http://sprinthotspot)
There are two ways to get the software update from the web page. You can get it from the Alert
message, or from the Software and Reset page.
To get the update from the Alert:
1. Log in to the home page. (See
2. In the Alert message for the available update, click Install Now.
3. Follow the onscreen instructions.
To get the update from the Software and Reset page:
1. Log in to the home page. (See
2. Click Settings > General > Software and Reset.
3. Click Check for update. If an update is available, an Install Now button appears.
4. Click Install Now.
5. Click Continue.

Upgrading Firmware From a File

A one-click tool may be available for upgrading firmware from a file in enterprise environments.
Contact Sprint for details.

Resetting Your Device

In some cases, you may want or need to clear your account information to use your device with
another account, reset most settings (except for your account and network activation), or reset
your device to its factory default settings.
You can clear these settings from your device's Reset screen, or from the Zing Manager's
Software and Reset page.

Clearing Account Details Only

If you want to use your device with another account, you need to clear your current account.
You can clear these settings from your device's Reset screen, or from the Zing Manager's
Software and Reset page.
Note: All connected devices will be disconnected and your device will reboot automatically.
You will have to activate your device with your new account before they can reconnect.
Software and Reset
Logging In as an Administrator.)
Logging In as an Administrator.)
108