Pressure Or Liquid Level Measurement With Flush Mount Transmitter; Figure 45 Typical Arrangement For Pressure Measurement With Flush Mount Transmitter; Figure 46 Typical Arrangement For Liquid Level Measurement With Flush Mount Transmitter - Honeywell ST 3000 User Manual

7.9 Pressure or Liquid Level Measurement with Flush
Mount Transmitter
Procedure
ATTENTION
Figure 45 Typical Arrangement for Pressure Measurement with Flush Mount Transmitter
Figure 46 Typical Arrangement for Liquid Level Measurement with Flush Mount Transmitter
6/05 ST 3000 Release 300 and SFC Model STS103 User's Manual
The procedure in Table 43 outlines the steps for starting up a gauge
pressure (GP) type transmitter in a pressure or liquid level measurement
application. Refer to Figures 45 and 46 for the flush mount transmitter
arrangement and Figure 38 for typical SFC and meter connections.
For the procedure in Table 43, we are assuming that piping arrangement
includes a block-off valve and a Tee-connector. If your piping does not
include a Tee-connector, you can only verify that the input and output
readings correlate.
Flush Mount
Transmitter
Process
Maximum Level
Minimum Level
1" Pipe Mount -
316 SS Weld Nipple
(standard option)
Flush Mount
Transmitter
145