Honeywell ST 3000 User Manual page 127

6.12 Configuring Smart Meter Using Pushbuttons,
Setting Lower Display
Values, continued
Table 35 Setting Lower Display Values for Smart Meter Display, continued
Step
5 Press Increase
available digit value or Decrease
select the previous digit value.
Repeat this action until desired value is on
display.
6 Press LOWER VALUE button to lock-in first
digit and activate next active digit.
Readout now displays next active digit which
will be zero unless lower value was set
before.
7 Press Increase
available digit value or Decrease
select the previous digit value.
Repeat this action until desired value is on
display.
8 Press LOWER VALUE button to lock-in
second digit and activate next active digit.
Readout now displays next active digit which
will be zero unless lower value was set
before.
9 Press Increase
available digit value or Decrease
select the previous digit value.
Repeat this action until desired value is on
display.
6/05 ST 3000 Release 300 and SFC Model STS103 User's Manual
Action
button to select the next
button to
button to select the next
button to
button to select the next
button to
Meter Display
First digit value setting.
V A R
SEL.
%
0
0
ANALOG
Press and hold to
scroll backward
0
through values
1
2
3
4
5
6
7
8
9
Third digit value setting.
V A R
SEL.
0 %
0 . 0 0
ANALOG
Press and hold to
scroll backward
through values 0
1
2
3
4
5
6
7
8
9
Continued
UPPE R
VALUE
100
UNITS
S E T
LOWER
VALUE
Press and hold to
scroll forward
through values
UPPE R
VALUE
100
UNITS
S E T
LOWER
VALUE
Press and hold to
scroll forward
through values
113