Honeywell ST 3000 User Manual page 133

6.12 Configuring Smart Meter Using Pushbuttons,
Setting Upper Display
Values, continued
Table 36 Setting Upper Display Value for Smart Meter Display, continued
Step
11 Press Increase
Decrease button to set it to BLANK.
12 Press UPPER VALUE button to lock-in "1"
digit and activate sign segment.
13 Press Increase
to minus sign for negative values or Decrease
button to set it to BLANK. for positive
values.
6/05 ST 3000 Release 300 and SFC Model STS103 User's Manual
Action
button to set digit to 1 or
button to set sign segment
Meter Display
"1" digit value setting is set to 1.
V A R
SEL.
0 %
1 99 90
ANALOG
K
Press to set "1"
digit as BLANK
Readout now displays sign segment which
will be BLANK for positive values unless
upper value was set for negative (–) values
before.
VA R
SEL.
%
0
1 99 90
Sign segment
is BLANK for
ANALOG
positive values
and minus sign
for negative
values
Continued
UPPE R
VALUE
100
UNITS
S E T
LOWER
VALUE
Press to set "1"
digit as 1
UPPER
VALUE
100
UNIT S
S E T
LOWER
VALUE
K
Continued on next page
119