Honeywell ST 3000 User Manual page 131

6.12 Configuring Smart Meter Using Pushbuttons,
Setting Upper Display
Values, continued
Table 36 Setting Upper Display Value for Smart Meter Display, continued
Step
5 Press Increase
available digit value or Decrease
select the previous digit value.
Repeat this action until desired value is on
display – use 9 for example purposes.
6 Press UPPER VALUE button to lock-in first
digit and activate next active digit.
Readout now displays next active digit which
will be zero unless upper value was set
before.
7 Press Increase
available digit value or Decrease
select the previous digit value.
Repeat this action until desired value is on
display – use 9 for example purposes.
6/05 ST 3000 Release 300 and SFC Model STS103 User's Manual
Action
button to select the next
button to
button to select the next
button to
Meter Display
First digit value setting is set to 9.
V A R
SEL.
0 %
90
ANALOG
K
Press and hold to
scroll backward
through values 0
1
2
3
4
5
6
7
8
9
V A R
SEL.
%
0
0 90
ANALOG
Continued
UPPE R
VALUE
100
UNITS
S E T
LOWER
VALUE
Press and hold to
scroll forward
through values
UPPE R
VALUE
100
UNITS
S E T
LOWER
VALUE
K
Continued on next page
117