Place A Meetme Conference Call; Privacy; Redial A Number; Select The Ringtone - Cisco 6921 User Manual

Place a MeetMe Conference Call

Place a MeetMe Conference Call
Procedure
Step 1 Obtain a MeetMe conference number from your system administrator
Step 2 Distribute the MeetMe conference number to all the participants.
Step 3
Go off-hook.
Step 4 Press the MeetMe soft key.
Step 5 Dial the MeetMe conference number.
All other participants can join the meeting by dialing into the MeetMe conference number.
Step 6 To end the MeetMe conference call, all participants must hang up the handset or press the Cancel soft key.

Privacy

Privacy allows you to prevent others who share your line from seeing information about your calls.
Privacy applies to all shared lines on your phone. If you have multiple shared lines and Privacy is enabled,
others cannot view any of your shared lines.

Redial a Number

To redial the most recently dialed number:
• Lift the handset and press the Redialsoft key.
• Press the Redial soft key to make a call using a speakerphone or headset.
• To place the call on a particular phone line, get a dial tone on that line, then press the Redial softkey.

Select the Ringtone

You can set separate ringtone for multiple lines by pressing the Line button. Also, you can set separate a
Note
ringtone for each number when there are multiple phone numbers on the phone.
Cisco Unified IP Phone 6921, 6941, 6945, and 6961 User Guide for
Cisco Unified Communications Manager Express Version 9.0 (SIP)
44
Operating Your Phone
OL-25524-01