Enable Extension Mobility; Establish/End A Conference Call - Cisco 6921 User Manual

Enable Extension Mobility

Enable Extension Mobility
Procedure
Step 1
Press the Applications button
Step 2
Select My Phone App. (Use the Navigation bar and button to scroll and select.)
Step 3 Select EM Service (name will vary).
Step 4 Enter your user ID and PIN (provided by your system administrator).
Step 5
If prompted, select a device profile.
Step 6 To sign out, press the Applications button.
Step 7 Select My Phone App.
Step 8
Select EM Service (name will vary).
Step 9 When prompted to sign out, press the Yes soft key.

Establish/End a Conference Call

Your system administrator must configure the system for a three-party or eight-party ad-hoc conference.
Procedure
Step 1 During a call, press the Conference button to open a new line and put the first party on hold.
Step 2
Place a call to another number.
Step 3 Press Conference button again to add the new party to the call.
Step 4 Perform any of the following steps to end a conference call:
• Hang up the handset, or press the Cancel soft key.
• Depending on the configuration, when the conference call initiator disconnects, the conference call
• To end the conference and remain connected to the most recent call, press the Conf soft key. The older
Cisco Unified IP Phone 6921, 6941, 6945, and 6961 User Guide for
Cisco Unified Communications Manager Express Version 9.0 (SIP)
38
terminates.
call is placed on hold.
.
Operating Your Phone
OL-25524-01