NETGEAR ProSafe WNDAP350 Reference Manual page 95

ProSafe Dual Band Wireless N Access Point WNDAP350 Reference Manual
3. Select the 802.11b/bg/ng tab. The Advanced Wireless Settings screen you selected displays,
as shown in Figure
Figure 4-3 Advanced Wireless Settings - 802.11b/bg/ng
4. Enter the appropriate information in the fields described below:
• RTS Threshold (0 - 2347): Request to Send Threshold. The packet size that is used to
determine if it should use the CSMA/CD (Carrier Sense Multiple Access with Collision
Detection) mechanism or the CSMA/CA mechanism for packet transmission. With the
CSMA/CD transmission mechanism, the transmitting station sends out the actual packet
as soon as it has waited for the silence period. With the CSMA/CA transmission
mechanism, the transmitting station sends out an RTS packet to the receiving station, and
waits for the receiving station to send back a CTS (Clear to Send) packet before sending
the actual packet data. The default is 2347.
• Fragmentation Length (256 - 2346): This is the maximum packet size used for
fragmentation. Packets larger than the size programmed in this field will be fragmented.
The Fragmentation threshold value must be larger than the RTS threshold value. The
default is 2346.
• Beacon Interval (100 - 1000): The Beacon Interval. Specifies the interval time between
100ms and 1000ms for each beacon transmission, which allows the access point to
synchronize the wireless network. The default is 100.
Advanced Configuration
4-3.,
v2.0, April 2013
4-5