NETGEAR ProSafe WNDAP350 Reference Manual page 29

ProSafe Dual Band Wireless N Access Point WNDAP350 Reference Manual
– Untagged VLAN. Untagged VLANs do not cause the outbound traffic to be tagged with
the VLAN ID. Also, there can be only one Untagged VLAN. The default is Enable and set
to 1.
– Management VLAN. Management VLANs are used for managing traffic (Telnet, SNMP,
and HTTP) to and from the Access Point. Management VLANs also cause outbound
traffic to be tagged with this VLAN ID. However, if their VLAN ID is same as the
Untagged VLAN ID, then the outbound traffic is not tagged. There can be only one
Management VLAN.The default is 1.
8. Select Time from the left panel. The Time screen displays, as shown in
Figure 2-4 Time zone and system time related settings
9. Enter the Time Settings for your area. See the online help or
page 2-8 for more information about how to configure the settings on this screen.
Basic Installation and Configuration
v2.0, April 2013
Figure 2-4.
"Configuring Time Settings" on
2-7