NETGEAR ProSafe WNDAP350 Reference Manual page 134

ProSafe Dual Band Wireless N Access Point WNDAP350 Reference Manual
maximum packet size 4-5, 4-7
multiple access points
placement of 2-3
multiple BSSIDs, support for
multiple input, multiple output (MIMO), support for
multi-point bridging
extend 4-15
extend range 4-15
N
NetBIOS name 2-6
Netgear products, compatible
network authentication, types of
legacy 802.1x 2-25
open system 2-25
shared key 2-25
WPA and WPA2 with RADIUS
WPA with RADIUS 2-25
WPA2 with RADIUS 2-25
WPA2-PSK 2-26
WPA-PSK 2-25
WPA-PSK and WPA2-PSK
network key
with WPA-PSK and WPA2-PSK
WPA-PSK 2-41
network statistics 3-14
fields 3-15
NTP client, configure 2-9
NTP server, configure 2-9
O
operating modes, supported
point-to-multi-point bridge.
point-to-point bridge 1-3
wireless access point 1-3
P
package contents 1-6
packet fragmentation, support for
packet size 4-5, 4-7
passphrase, use with WEP
Index-4
1-2
1-4
1-5
2-25
2-26
2-43
1-3
1-4
2-26, 2-34
v2.0, April 2013
password
change 3-10
performance degradation
causes of 2-2
placement 2-2
PoE switches 1-3
point-to-multi-point bridge
configure 4-14
point-to-point bridge 4-10
configure 4-13
point-to-point bridge mode
wireless point-to-multi-point bridge
power adapter 1-10
power consumption 2-2
Power over Ethernet (PoE), support for
preamble type 4-6
preshared key passphrase
WPA-PSK 2-41
primary DNS server, configure
profile name
bridge mode wireless station
wireless point-to-multi-point bridge
Q
QoS queues 4-9
QoS settings 2-21
QoS settings, advanced
AP EDCA parameters 4-9
station EDCA parameters
R
RADIUS and certificate authentication, support
RADIUS server, configure
accounting server 2-30
authentication server 2-30
RADIUS server, configure first
range 1-1
guidelines 2-2
rear panel 1-9
reboot 3-9
4-10
4-10
1-3
2-14
4-10
4-11
4-9
1-2
2-29
2-23, 2-31