NETGEAR ProSafe WNDAP350 Reference Manual page 61

ProSafe Dual Band Wireless N Access Point WNDAP350 Reference Manual
To configure WPA and WPA2 with RADIUS:
1. Under the Configuration tab, select Security on the main menu, select Advanced from the
left panel, and then select RADIUS Server Settings. The RADIUS Server Settings screen
displays.
2. Enter the RADIUS settings as shown in
page 2-29.
3. Click Apply to save your RADIUS settings
4. Under the Configuration tab, select Security from the main menu, and then select either
Security Profile Settings for 802.11b/bg/ng or 802.11a/na. The screen for the Profile Settings
you selected displays. When the Security Profile screen displays, check the check box of the
Security Profile you want to modify and click Edit.
5. From the Network Authentication drop-down menu, select WPA & WPA2 with RADIUS
from the list. By default, Data Encryption will be set to TKIP+AES.
6. Wireless Client Security Separation is disabled by default. If enabled, associated wireless
clients will not be able to communicate with each other. (This feature is intended for hotspots
and other public access situations.
7. Click Apply to save your settings.
Basic Installation and Configuration
""Configuring the RADIUS Server Settings" on
v2.0, April 2013
2-39