NETGEAR ProSafe WNDAP350 Reference Manual page 22

ProSafe Dual Band Wireless N Access Point WNDAP350 Reference Manual
Table 1-1. Front Panel LED Indicators (continued)
Item LED
4 802.11na WLAN
Off
Blink
(Green)
5 802.11ng WLAN
Off
Blink
(Green)
Rear Panel
1
2
Figure 1-2
The WNDAP350 rear panel functions are described below:
1. Left and Right Detachable Antennas. The WNDAP350 provides two detachable dipole
antennas.
2. Power Socket. This socket connects to the WNDAP350 12V 1.2A power adapter.
3. RJ-45 Ethernet Port. Use the WNDAP350 Ethernet RJ-45 port to connect to an Ethernet LAN
through a device such as a hub, switch, router, or PoE switch.
4. Serial Console Port. Male DB-9 serial port for serial DTE connections.
5. Restore to Factory Defaults Button. The restore to default button restores the WNDAP350 to
the factory default settings.
1-8
DESCRIPTION
Wireless LAN Link Activity Indicator (5 GHz)
Indicates WLAN 802.11n/a (5GHz) mode is disabled.
Indicates Wireless data traffic in 5GHz modes.
Wireless LAN Link Activity Indicator (5 GHz)
Indicates WLAN 802.11b/g (5GHz) mode is disabled.
Indicates Wireless data traffic in 2.4GHz modes.
3
v2.0, April 2013
5
4 1
Introduction