Setting For Auditing Accounts - Sharp SF-1116 Operation Manual

Setting for auditing accounts

Setting of user programs No. 10 to 15 varies with the program number.
For setting of all programs, first follow steps 1 to 3 in "Setting the user
programs" on page 31 to select a program. (1. Press the TRAY
SELECT ( ) key for more than 5 seconds. 2. Enter a program
number (10 to 15) using the 10-key pad. 3. Press the print (
button.) Then follow the appropriate instructions for the program.
Program No. 10: Auditing mode
If the auditing mode is enabled, copying is limited to operators with an
assigned 3-digit account number. A maximum of 20, 3-digit account
numbers can be assigned. Use program No. 11 to register account
numbers.
When program No. 10 is entered, the current setting (0: OFF, 1:ON)
will blink on the right side of the copy quantity display.
1 2 3
4 5 6
8 9
7
0/ C
Program No. 11: Account number entry
Program No. 11 is used to register accounts. When program No. 11
is entered, "–––" will blink in the copy quantity display.
If the number of accounts has reached the upper limit (20), "11E"
will appear in the copy quantity display. Press the
will return to step 2 on page 31.
1 2 3
4 5 6
7 8 9
0/ C
)
1. Select the desired setting using the 10-key pad.
0: OFF
1: ON
2. Press the print (
The setting will be stored.
3. To continue with other user programs, press the
key and enter other program numbers. To exit the user
program mode, press the TRAY SELECT (
key. You
1. Enter a 3-digit account number using the 10-key pad.
Any 3-digit number except 000 can be registered as an account
number.
2. Press the print (
If a number that is already registered or "000" is entered, the
number will blink in the copy quantity display.
3. Repeat steps 1 and 2 for other account numbers.
4. To continue with other user programs, press the
key and enter other program numbers. To exit the user
program mode, press the TRAY SELECT (
USER PROGRAMS
) button.
) button.
) key.
) key.
33