AUTOMATIC EXPOSURE ADJUSTMENT
The automatic exposure level can be adjusted to suit your copying
needs.
AUTO
1 2 3 4 5
AUTO
1 2 3 4 5
1 2 3 4 5
AUTO
1 2 3 4 5
1
Press the AUTO/MANUAL/PHOTO (
to select the PHOTO (
2
Press and hold the AUTO/MANUAL/PHOTO (
) key for approximately 5 seconds.
The PHOTO (
will begin to blink.
One or two exposure indicators corresponding to the automatic
exposure level which has been selected will light up. The factory
default setting is level "3".
Press the LIGHT (
3
or darken the automatic exposure level as desired.
4
Press the AUTO/MANUAL/PHOTO (
The AUTO indicator will stop blinking and will light up steadily.
This automatic exposure level will remain in effect until you
change it again by this procedure.
) mode.
) indicator will go out and the AUTO indicator
) or DARK (
/
/
) key
/
/
) key to lighten
/
/
) key.
19