Auditing Accounts - Sharp SF-1116 Operation Manual

AUDITING ACCOUNTS

If this copier has been programmed in the auditing mode, it will not
function until an assigned 3-digit account number has been entered.
See page 33 for setting the auditing mode.
%
%
%
%
%
ZOOM
%
%
%
2
1
4 5
8
7
0/ C
ACC.#-C
8
If the copier has been programmed in the auditing mode, "–––" will
appear in the copy quantity display in the initial conditions.
1 Enter your account number using the 10-key pad.
3
As each digit is entered, the dashes in the copy quantity display
will disappear.
6
After the number is entered, the copy quantity display will
change to 0 and the READY indicator will light up.
9
If an unassigned number is entered, "–––" will appear again in
the copy quantity display, indicating that the number was not
accepted.
2 When a copy run is completed, press the AUDIT CLEAR
(
"–––" will appear again in the copy quantity display, indicating
the auditing mode.
In the interrupt copy mode (see page 18), press the INTERRUPT
(
) key.
) key after an interrupt copy run is completed.