Power Save Modes - Sharp SF-1116 Operation Manual

Electrostatic copying machine
Hide thumbs Also See for SF-1116:
Table of Contents

Advertisement

POWER SAVE MODES

The copier has two POWER SAVE modes of operation — preheat
mode and auto power shut-off mode.
The copier will enter a power save mode once the set time has elapsed
without any copier operation after the last copy of a run is made or
power is turned on.
Both of the power save modes can be automatically controlled by the
auto power save control function. When enabled, this function will
automatically establish new set times for the preheat and auto power
shut-off modes based upon copier usage patterns.
3
6
9
C
3
6
9
C
Preheat mode
ACC.#-C
When the copier enters the preheat mode, the POWER SAVE (
indicator will light up and other indicators will remain on or off as before.
In this condition, the fuser in the copier is maintained at a lower heat
level, thereby saving power. The preheat level is, however, high
enough to allow the copier to come to a ready condition or begin
CA
copying within 10 seconds after any key input or copier operation such
as paper tray operation is performed.
Auto power shut-off mode
ACC.#-C
When the copier enters the auto power shut-off mode, the POWER
SAVE (
The auto power shut-off mode saves more power but requires a longer
time to warm up before copying can begin.
CA
Auto power save control
The auto power save control function automatically controls the power
save modes. If this function is enabled, the copier will enter the preheat
mode a certain length of time after any copier operation and then will
enter the auto power shut-off mode. The time that elapses before the
copier enters the preheat mode or auto power shut-off mode is set
automatically by the copier, which calculates the proper time depending
on the user's copying frequency and copy quantity.
If the POWER SAVE (
are on, the copier is in the preheat mode.
If the POWER SAVE (
off, the copier is in the auto power shut-off mode.
) indicator will light up and all other indicators will go out.
) indicator is on and some other indicators
) indicator is on and all other indicators are
)
37

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sf-1118

Table of Contents