Table of Contents
Advertisement
ZOOM
1
2
3
4
5
6
ZOOM
8
9
7
%
0/
C
For operation of these programs after
step 3, see page 33.
ZOOM
%
Setting the user programs
1
Press and hold the TRAY SELECT (
than 5 seconds until all the alarm indicators* blink and
"– –" appears in the copy quantity display.
* The alarm indicators are the
indicators.
2
Enter a program number using the 10-key pad.
The selected program number will blink in the copy quantity
display.
If a mistake is made in steps 2 to 4, press the clear (
You will return to step 2.
The program numbers are shown in the table below.
For example, to change the setting of the auto clear time, press
key 1.
Program name
Auto clear time
Preheat mode
Auto power shut-off timer
Auto power save control
Stream feeding mode
Sorter bin access mode
Auditing mode
Account number entry
Account number change
Account number deletion
Number of copies per account
Resetting account
Auto power shut-off setting
3
Press the print (
For programs 1 to 7 and 20, the entered program number will be
steadily lit on the left side of the copy quantity display and the
currently selected parameter number for the program will blink
on the right side.
For programs 10 to 15 (programs for auditing accounts), the
display varies with the program number. See page 33 for setting
programs 10 to 15.
USER PROGRAMS
) key for more
,
,
Program No.
) button.
,
, and
) key.
1
2
3
4
5
7
10
11
12
13
14
15
20
31
Hide quick links:
Advertisement
Chapters
Table of Contents
