Auditing Accounts; How To Copy In The Auditing Mode - Sharp AR-235 Operation Manual

AUDITING ACCOUNTS

If this copier has been programmed in the auditing mode, it will not perform copier functions until an
assigned 5-digit account number has been entered.
5 KEY OPERATOR See page 137 for setting the auditing mode.

How to copy in the auditing mode

If the copier has been programmed in the auditing mode, the following message will appear in the
display in place of the normal initial conditions display.
1
Enter your account number using the numeric keys.
q
As each digit is entered, the dashes in the display will change to asterisks.
q
After the number is entered, the following message will appear in the display.
q
"REMAINING" will appear only if account limit has been set using a key operator
program.
5KEY OPERATOR See page 140 for account limit.
q
The message will be displayed for several seconds, then change to the following
message.
20
Enter your account
number.
ACCOUNT #:
COPIES MADE:000,000
REMAINING:000,000
100% 100%
Ready to copy.
8 11 1
2 /
AUTO
100% 100%
A4
AUTO
AUTO
A4
AUTO