Toner Save Mode - Sharp SF-1116 Operation Manual

TONER SAVE MODE

This mode reduces toner consumption by approximately 10% in the
automatic and manual exposure modes. Copies will be lighter but still
adequate for general use. Selection of this mode does not affect the
photo mode. Follow the procedure below for setting the toning level.
AUTO
1 2 3 4 5
AUTO
1 2 3 4 5
1 2 3 4 5
AUTO
1 2 3 4 5
20
1 Press the AUTO/MANUAL/PHOTO (
to select the MANUAL (
2 Press and hold the AUTO/MANUAL/PHOTO (
) key for approximately 5 seconds.
The MANUAL (
( ) indicator will begin to blink.
The exposure indicator marked "5" will light up, indicating that
the standard toner mode is active.
To enter the toner save mode, press the LIGHT (
3
key.
The exposure indicator marked "1" will light up, indicating that
the toner save mode is selected.
4 Press the AUTO/MANUAL/PHOTO (
twice.
The PHOTO (
indicator will light up steadily. The toner save mode is now
active.
To return to the standard mode, repeat the procedure but use
the DARK (
) mode.
) indicator will go out and the PHOTO
) indicator will stop blinking and the AUTO
) key to select exposure level "5" in step 3.
/ / ) key
/ /
)
/ / ) key