Loading Copy Paper - Sharp SF-1116 Operation Manual

LOADING COPY PAPER

To save space, this copier has been designed with an adjustable front-
loading tray, which is easily opened for paper loading. For best results,
use only Sharp recommended paper. (See page 43.)
The paper required ( ) indicator will light up when there is no copy
paper in the selected paper feed station, or when the selected paper
tray is not installed or is improperly installed.
When paper runs out while the optional multi bypass feeder is being
used, a blinking will appear in the copy quantity display. (See
page 64.)
For convenience of quickly changing paper sizes, additional trays
(SF-UB15) are also available. These are sold separately. (See page
65.)
Maximum height line
1 Gently lift and pull out the paper tray.
Fan the copy paper and insert it into the tray.
2
If you change to a different size of copy paper, the tray must be
adjusted. See the next page.
Set the paper along the guides.
The tray holds up to 250 sheets of paper.
Do not load paper above the maximum height line.
When adding paper, first remove remaining paper, combine it
with the paper to be added and then reload as a single stack.
3 Push the paper tray firmly back into the copier.
3