User Programs - Sharp AL-1217D Operation Manual

2
Press and hold down the exposure mode
selector key for approximately 5 seconds.
The MANUAL (
and the PHOTO (
to blink. The light and dark indicator
marked "5" will light up, indicating the
standard toner mode is active.
3
To enter the toner save mode, press the
light (
indicator marked "1" will light up,
indicating the toner save mode is
selected.
4
Press the exposure mode selector key. The PHOTO (
indicator will stop blinking and light up steadily. The light and
dark indicator marked "3" will light up. The toner save mode is
now active.

USER PROGRAMS

The user programs allow the parameters of certain functions to be set, changed, or
canceled as desired.
Setting the power save modes, auto clear time, stream
feeding mode and resolution of AUTO & MANUAL mode
1
Press and hold down the light (
simultaneously for more than 5 seconds until all the alarm
indicators (
2
Use the left copy quantity (
number (1: auto clear time, 2: preheat mode, 3: auto power
shut-off timer, 4: stream feeding mode, 5: auto power shut-off
mode 6: resolution of AUTO & MANUAL mode). The selected
number will blink in the left side of the display.
3
Press the start (
steadily lit and the currently selected parameter number for the
program will blink on the right side of the display.
4
Select the desired parameter using the right copy quantity (
key. The entered parameter number will blink on the right of the
display.
Downloaded from:
) key. The light and dark
To return to the standard mode, repeat the procedure but use the dark
( ) key to select exposure level "5" in step 3.
,
http://www.usersmanualguide.com/
) indicator will go out
) indicator will begin
) and dark (
, ) blink and "
) key to select a user program
) key. The entered program number will be
) keys
" appears in the display.
)
6
)
55