This chapter describes the special functions of this copier. Use these functions as needed.
DESCRIPTION OF SPECIAL FUNCTIONS
Toner save mode
Reduces toner consumption by approximately 10%.
Power save modes (page 20)
The copier has two power save modes of operation: preheat mode and auto power shut-off
mode.
Preheat mode
●
When the copier enters the preheat mode, the power save (
other indicators will remain on or off as before. In this condition, the fuser in the copier is
maintained at a lower heat level, thereby saving power. To copy from the preheat mode,
make desired copier selections and press the print (
procedure.
Auto power shut-off mode
●
When the copier enters the auto power shut-off mode, the power save (
light up and other indicators will go out. The auto power shut-off mode saves more power
than the preheat mode but requires a longer time before starting copying. To copy from the
auto power shut-off mode, press the print (
and press the print (
Auto clear (page 20)
The copier returns to the initial settings a preset amount of time after the last copy is made.
This preset amount of time (auto clear time) can be changed.
TONER SAVE MODE
01C-3.p65
Downloaded from:
http://www.usersmanualguide.com/
SPECIAL FUNCTIONS
) key using the normal copying procedure.
Press the exposure mode selector key to select the manual (
19
) indicator will light up and
) key using the normal copying
) key. Then make desired copier selections
) mode.
2/11/00, 15:56
3
) indicator will
19