Cisco CAtalyst 4500 Series Installation Manual page 29

Chapter 1 Product Overview
Table 1-3 Features of the Catalyst 4507R Switch
Feature
Ethernet speeds
Standard equipment
Power supplies
78-14409-08
Series Supervisor Engines and Switching Modules Installation Note. Some
supervisor engines use SFP modules for Gigabit Ethernet connections, or X2
modules for 10-Gigabit Ethernet connections. Refer to the installation note for
your supervisor engine for more details on these modules.
Slot 1 is reserved for the supervisor engine only, which provides switching, local
and remote management, and switch-status monitoring. Slot 2 is reserved for a
redundant supervisor engine only. Slots 3 through 7 are available for switching
modules.
Table 1-3 describes the features of the Catalyst 4507R switch.
Description
Ethernet (10BASE-T) interface to workstations and repeaters
•
• Fast Ethernet (100BASE-T) interface to workstations, servers, switches, and
routers
Autonegotiation of link speed on each 10/100 port allows migration to
Note
100BASE-T from a 10BASE-T installed base.
Gigabit Ethernet (1000BASE-T and 1000BASE-X) interfaces for backbone
•
interconnection of high-performance switches and routers
10-Gigabit Ethernet interfaces for backbone interconnection of
•
high-performance switches and routers
Seven-slot modular chassis with one slot reserved for a supervisor engine,
•
one slot reserved for a redundant supervisor engine, and five slots for
switching modules
Two power supply bays
•
One hot-swappable fan assembly
•
Can support a 1000 W, 1300 W, 1400 W, 2800 W, or 4200W AC-input power
•
supply or a 1400 W DC-input single or triple-input power supply
Optional redundant power supply
•
Catalyst 4500 Series Switches Installation Guide
Switch Features
1
1-11