Cisco CAtalyst 4500 Series Installation Manual page 142

Replacing Backplane Modules on a Catalyst 4507R or 4510R Switch
Pull out the module while holding the top left and top right corners. (See
Step 7
Figure
Note
Figure 4-24
Put the replacement module in at roughly a 30 degree angle, and gently push the
Step 8
module down. Make sure you apply force evenly on the left and right. (See
Figure
Figure 4-25
Catalyst 4500 Series Switches Installation Guide
4-28
4-24.)
When handling the modules, do not touch the chips or the gold edge
contacts on the module.
Removing the Module
4-25.)
Seating the Replacement Module
Chapter 4 Removing and Replacing FRUs
78-14409-08