Cisco CAtalyst 4500 Series Installation Manual page 113

Chapter 3 Installing the Switch in a Rack
Figure 3-17
Wire
Step 5 Remove the label that covers the grounding pad.
Place the grounding lug against the grounding pad, aligning the holes. Insert the
Step 6
two M4 screws through the holes in the grounding lug and grounding pad
(Figure 3-15
Ensure that the grounding lug and the attached wire will not interfere with other
switch hardware or rack equipment.
78-14409-08
Connecting System Ground on the Switch
WS -X4
448 -GB
-RJ 45
ST AT
US
WS -X4
448 -GB
-RJ 45
10/10 0BAS
E-TX
ETHE RNE
T
ST AT
US
10/10 0BAS
E-TX
ETHE RNE
T
Grounding lug
Screws (M4)
and Figure 3-17).
Catalyst 4500 Series Switches Installation Guide
System Ground Connection Guidelines
MUL TI-SP
GIGA BIT EED
ETHE RNE
SWIT CHIN T
G MOD
ULE
MUL TI-SP
EED
GIGA BIT
SWIT CHIN ETHE RNE
T
G MOD
ULE
Grounding
pad
3-25