Cisco CAtalyst 4500 Series Installation Manual page 26

Switch Features
Table 1-2 Features of the Catalyst 4506 Switch (continued)
Feature
Supervisor engine
support
Switching module
support
Catalyst 4500 Series Switches Installation Guide
1-8
Description
Supports the Supervisor Engine II, II+, II+10GE, III, IV, V, 6-E
•
Holds the ASIC-based forwarding engine (data path) and the
•
management processor and software (control path)
Features interface monitoring, environmental status, and SNMP and
•
console/Telnet interface
Packets are not forwarded while the module is removed; a system
Note
reboot occurs when a supervisor engine is reinserted.
24-port 10/100BASE-TX Fast Ethernet switching module
•
(WS-X4124-RJ45)
24-port 100BASE-FX Fast Ethernet switching module
•
(WS-X4124-FX-MT)
48-port 100BASE-FX Fast Ethernet switching module
•
(WS-X4148-FX-MT)
48-port 100BASE-LX10 Fast Ethernet switching module
•
(WS-X4148-FE-LX-MT)
48-port 10/100-Mbps Fast Ethernet switching module (WS-X4148-RJ)
•
48-port 100BASE-BX10-D Fast Ethernet switching module
•
(WS-X4148-FE-BD-LC)
48-port 10/100-Mbps Fast Ethernet switching module
•
(WS-X4148-RJ21)
48-port Cisco pre-standard Power over Ethernet (PoE)
•
10/100BASE-TX switching module (WS-X4148-RJ45V)
24-port IEEE 802.3af-compliant PoE 10/100BASE-TX switching
•
module (WS-X4224-RJ45V)
48-port IEEE 802.3af compliant PoE 10/100BASE-TX RJ-45 switching
•
module (WS-X4248-RJ45V)
48-port 100BASE-X Fast Ethernet switching module
•
(WS-X4248-FE-SFP)
48 port IEEE 802.3af compliant PoE 10/100BASE-TX RJ-21 switching
•
module (WS-X4248-RJ21V)
Chapter 1 Product Overview
78-14409-08