Cisco CAtalyst 4500 Series Installation Manual page 128

Removing and Replacing the Power Supply
Using a screwdriver, loosen and remove the captive screws on the power supply.
Step 6
(See
power supply has captive screws in the same location.)
Figure 4-15
Step 7 Grasp the power supply handle with one hand. Place your other hand underneath
as you slowly pull the power supply out of the bay (see
Catalyst 4500 Series Switches Installation Guide
4-14
Figure 4-15, which shows the single input power supply. The triple-input
Loosening the Captive Screws
Chapter 4
Captive screws
Removing and Replacing FRUs
Figure 4-16).
78-14409-08