Appendix B Repacking A Switch - Cisco CAtalyst 4500 Series Installation Manual

Related Documentation
Chapter Title
Chapter 4 Removing and
Replacing FRUs
Chapter 5 Troubleshooting
Appendix A Specifications
Appendix B Repacking a Switch
Related Documentation
Catalyst 4500 Series Switches Installation Guide
x
Description
Describes how to remove and replace field-replaceable units
(FRUs).
Provides troubleshooting guidelines for the initial hardware
installation and suggests steps to help isolate and resolve
problems.
Lists the cable and technical specifications of the
Catalyst 4500 series switches.
Provides instructions for repacking your Catalyst 4500
series switch in the event that you have to return it to the
factory.
Refer to the following documents for additional Catalyst 4500 series information:
For information about individual switching modules and supervisors refer to
•
the Catalyst 4500 Series Module Installation Guide at:
http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/hardware/mod
ule/guide/mod_inst.html
Regulatory Compliance and Safety Information for the Catalyst 4500 Series
•
Switches at:
http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/hardware/regul
atory/compliance/78_13233.html
The release note appropriate to your software version. Release notes are at:
•
http://www.cisco.com/en/US/products/hw/switches/ps4324/prod_release_no
tes_list.html
The software configuration guide appropriate to your software version.
•
Software configuration guides are at:
http://www.cisco.com/en/US/products/hw/switches/ps4324/products_install
ation_and_configuration_guides_list.html
Preface
78-14409-08