Cisco CAtalyst 4500 Series Installation Manual page 103

Chapter 3 Installing the Switch in a Rack
c.
d.
Figure 3-9
78-14409-08
Secure the chassis using at least six (three per side) 12-24 x 3/4-inch screws
through the elongated holes in the L bracket and into the threaded holes in the
mounting post.
Use a tape measure and level to ensure that the chassis is installed straight and
level.
Installing a Catalyst 4503 Switch in the Rack
45 06
1
13
1
13
1
13
1
13
Catalyst 4500 Series Switches Installation Guide
Rack-Mounting the Switch
3-15