Vlan - Buffalo WAPS-APG600H User Manual

VLAN

Configure the VLAN settings for the wired LAN here. Don't change VLAN settings unless you know what you're doing!
LAN Settings - VLAN
VLAN Mode
VLAN ID
Management VLAN ID
Select the VLAN mode of the wired LAN port (#1, #2). One of the VLAN
modes below can be selected.
Tagged Port
This adds a tag (compliant with IEEE 802.1Q) to all frames that are sent
and received from the wired LAN port. Because all frames received by the
AirStation can be transferred, VLAN networks that contain different IDs
can be relayed.
Untagged Port
This receives only frames that have not been tagged. The specified VLAN
ID is added to the received frames, and they are transferred to another
LAN port.
Enter a specific VLAN ID to the interface VLAN. An integer value from 0
to 4096 can be set for the VLAN ID. You can enter a value in this field only
when "Untagged port" is selected for VLAN mode.
Sets the VLAN ID of the management VLAN. An integer value from 0 to
4096 can be set for the VLAN ID.
Note: Limitations are placed on the values that can be set to the
management VLAN ID for enabling access to the management VLAN
from the wired LAN. One of the conditions below must be satisfied.
• If all wired ports are untagged ports, the VLAN ID of one of the ports
must be the same as the management VLAN ID.
• One of the wired ports is a tagged port.
28