Buffalo WAPS-APG600H User Manual page 8

Wireless LAN error.
5 blinks:
USB error.
9 blinks **:
System error.
Continuously blinking *:
Updating firmware, saving settings, or initializing settings.
* Do not unplug the AC adapter while the diag LED is blinking continuously.
** Turn off AirStation first, wait for a few seconds, then turn it back on.
3
5 GHz LED (Blue)
On:
5 GHz wireless is enabled.
Randomly blinking:
5 GHz wireless is transmitting.
2 blinks:
AirStation is waiting for an AOSS or WPS security key.
Continuously blinking:
AOSS/WPS error; failed to exchange security keys.
Note: You can permanently turn off this LED in Settings.
4
2.4 GHz LED (Green)
On:
2.4 GHz wireless is enabled.
Randomly blinking:
2.4 GHz wireless is transmitting.
2 blinks:
AirStation is waiting for an AOSS or WPS security key.
Continuously blinking:
AOSS/WPS error; failed to exchange security keys.
Note: You can permanently turn off this LED in Settings.
5
LAN LED (Green)
On:
An Ethernet device is connected.
Blinking:
An Ethernet device is communicating.
6
Antenna Connector
Screw on the included antennas here.
Note: The supplied antenna supports both the 2.4 GHz and 5 GHz bands.
8