VLAN Mode
VLAN ID
Encryption
Registered Access Point
RADIUS
Configure the RADIUS server used for wireless LAN device authentication and other operations here.
In the AirStation, IEEE802.11g and IEEE802.11a can each be registered to 2 (primary and secondary) external RADIUS
servers. When the primary and secondary servers are registered, if a communication problem occurs in the primary
server, the inquiry target can be automatically switched to the secondary server for continuing the authentication
process.
Note: The RADIUS server must be capable of being accessed from the management VLAN.
Configure the network ID of the VLAN associated with this WDS
connection.
Untagged port
Defined as an untagged LAN port. The AirStation transfers only network
communication frames with a preset VLAN ID to this LAN port. The VLAN
ID must be set at the same time.
Tagged port
Defined as the tagged LAN port. The AirStation transfers all network
communication frames to this LAN port. During this transfer, a VLAN tag
compliant with IEEE802.1Q is inserted.
This must be set only when "Untagged port" is specified for the VLAN
mode. This specifies the VLAN network associated with the WDS
connection. Communication with networks and LAN ports having
different VLAN numbers is not possible.
Specify the encryption protocol used for the WDS connection.
None
No encryption is configured for communication in WDS connections. This
setting is not recommended.
WEP
WEP is used for communication in WDS connections. A fixed-length
encryption key (shared key) must be set in both the WDS sending and
receiving AirStations.
AES
AES is used for communication in WDS connections. To use AES, a
preshared key (PSK) must be set in both the WDS sending and receiving
AirStations.
Displays a list of the MAC addresses of access points connected by WDS.
Edit
Click to edit the access point information.
Delete
This removes individual access point information.
Delete All
This removes all access point information.
44